Recently active topics

I am getting ready to deploy a new Nutanix cluster next week and am preparing my Foundation VM.  I have imported the 7.5.1.6 AOS package which then states that the minimum AHV version is 11.0.1.2-33.  I’ve then downloaded this ISO from the link direct within Foundation and imported but I then get the message that this in an unsupported Hypervisor.  I’ve updated the whitelist but the hypervisor is still showing as not in the whitelist.  Am I ok to just install or do I need to check something else?

I have a nutanix environment Running well and it is an OT Production environment. Due to some reason I want to change the Cluster Name, so before changing, I have a doubt that will cluster name change impact the virtual machine and its operation? and do I need to reboot the cluster when the cluster name is changed to new.

Below are new knowledge base articles published on the week of June 7-13, 2026.Support Portal login required:KB-21160 - NDB | Prerequisites for Upgrading Oracle ASMLIB from v2 to v3 with Nutanix Database Service (NDB) KB-21711 - NDB | Pre-Patch Validation Runbook for SQL Server AG clusters patched via NDB KB-21730 - MIG Configuration Not Retained After Nutanix Kubernetes Platform (NKP) Upgrade KB-21740 - Modifying Prism Central-only alerts generates a failing task on Prism Element KB-21763 - Nutanix DR | Cross-Cluster Live Migration (CCLM) does not progress due to MTU mismatch between the source and the target clusters KB-21770 - FVN: Node disconnected from the Network Controller Alerts due to Ikat Proxy (Envoy) crash on Prism Central KB-21774 - NKP rook-ceph-osd Pods Experience Failure After PVC Resize KB-21803 - Kemp Load Balancer HA checks fail in Nutanix Flow VPC KB-21806 - Fanout API Task Execution Failure When Updating System Defined Alert Policies KB-21810 - Commvault backups ma

I am requesting the expected release date for my NCP-MCI 7.5 and NCP-BC beta exam results.As these are beta tracks,I would appreciate an estimated timeline for when scores will be finalized and reflected in the Nutanix University portal. Thanks you, 

Hello All,Here are a few updates this week for NDB. If you have any requests for videos or content you would like to see on a specific feature of NDB, be sure to leave a comment.NDB 2.10.1.1 release, click to see the release notes.NDB  Tech Talk Video on Architectural Best Practices released on Nutanix University youtube. 

I have encountered a roadblock while configuring LDAP and SAML authentication from the same domain for a Customer. The Customer wants that whenever a user logins , it does from SAML and whenever a service account is logging into PC , it uses LDAP. Is there a way to configure this in Prism Central?

i  have a nutanix cluster  of node with (25gb ) uplink  and LACP is configured on it . i need to to expand cluster with nodes with ( 100GB ) uplink .i prepared the new node with below configuration:1-  re-imaged the new node with same version of AOS and AHV  as the existing cluster 2-  configured the  the new node with LACP my questions:1- is there any impact  to cluster that we mix speed of network as some node work with 25g and other with 100g ?2-  in expand cluster steps the is tab of network configuration is mandatory to set its configuratiion or can skip this configuration as i configured on new node , what will happen if i skip network configuration during expand 3- how long the expand will take to expand 4 node ? 

Below are the top knowledge base articles for the month of May 2026.KB-13150 - NCC Health Check: cfs_fatal_check KB-7503 - NX Hardware [Memory] - DIMM Error handling and replacement policy KB-3827 - Alert - A130087 - Node Degraded KB-1540 - AOS Only - What to do when /home partition or /home/nutanix directory on a Controller VM (CVM) is full KB-8453 - Alert - A1044 - PathOffline KB-1536 - NCC Health Check: disk_online_check KB-21372 - Prism Central displays an alert for high disk usage in /home/log/audit KB-21471 - Investigation and Mitigation Guidance for CVE-2026-31431 on Nutanix Products KB-4944 - Unregister cluster from Prism Central and cleanup (regular and force) FAQ KB-21134 - Alert "Inconsistent Virtual Switch State Detected" after AHV Upgrade to 11.0.0.1 or 11.0.0.2 KB-8885 - Alert - A15039 - IPMI SEL UECC Check KB-13104 - Alert - Inconsistent Virtual Switch State Detected KB-6945 - How Upgrades Work at Nutanix KB-9437 - How to restore a node from LCM firmware upgrade failure

Below are new knowledge base articles published on the week of May 31-June 6, 2026.Support Portal login required:KB-21100 - NCM : Clean up duplicate data from ClickHouse DB after re-onboarding a Prism Central account KB-21375 - NCM : Troubleshooting Nutanix Cloud Manager (NCM) 2.0 Marketplace Deployment KB-21461 - Guest customization failure during VM deployment from template across Prism Element clusters KB-21466 - NX/HPE: Dark site LCM upgrade fails with "Required modules are not found" due to incorrect framework bundle KB-21642 - Platform Bootstrap Fetches Incorrect Configuration During v4 API Deployment KB-21657 - ExternalDNS on NKP Fails to Create DNS Records with Windows Server 2025 KB-21669 - NCC: salt_check false positive warning due to null characters in cron log files KB-21708 - Nutanix Central On-Premises: Incompatibility with Prism Central 7.5.1.1 KB-21718 - Harbor Valkey Pods Enter TILT Mode Due to DNS Latency in Nutanix Kubernetes Platform (NKP) KB-21728 - Removing Azure

Below are new knowledge base articles published on the week of May 24-30, 2026.Support Portal login required:KB-20912 - NCM : Restoring NCM Connectivity After Home Prism Central Disaster Recovery KB-21004 - NCM : Manual Cleanup of Nutanix Central (NC) and Nutanix Cloud Manager (NCM) Without Offboarding KB-21476 - Subnet?Extension Wizard shows empty or incomplete Virtual Tunnel End Point (VTEP) gateway list when more than 50 gateways exist KB-21552 - CVM Services Down and Genesis Crash Loop ("vNIC ntnx0 is missing") After Using "virsh start" (AHV 20230302.100173 or later) KB-21584 - Lenovo: Hostnames are not displayed in Prism and VM operations fail with AMD Zen5 (Turin) CPUs due to outdated BIOS KB-21602 - Alert - A130193 - Full Replication Started for the VM KB-21608 - Foundation Central: Removed node still shows as "Clustered" state KB-21612 - snmp_manager in restart loop after setting non-161 port number KB-21620 - NCM : Prism Central is not reachable due to backup data and PC?s NC-

Below are new knowledge base articles published on the week of May 17-23, 2026.Support Portal login required:KB-21006 - NCM : Nutanix Cloud Manager (NCM) Restoration and Remediation Scenarios KB-21102 - NCM : How to clean up NCM data from Prism Central after deploying decoupled NCM KB-21477 - In-place cluster conversion (ESXi to AHV) causes PC stack outage KB-21495 - Move - Redirect post login changes from FQDN to Move IP Address KB-21549 - Investigation and Mitigation Guidance for CVE-2026-31431 on SCVM KB-21565 - NDB : Investigation and Mitigation Guidance for CVE-2026-31431 KB-21593 - NDB: Failed to register database server: Error in attaching staging disk KB-21600 - NKP deployment fails with "RESOURCE_SHORTAGE: Not enough resources available for the VM" KB-21609 - Firmware upgrades via LCM fails on LUKS enabled clusters with AOS 7.3.x KB-21614 - Prism Central - Failed to read zeus database the specified node does not exist KB-21623 - Nutanix Kubernetes Platform: Renaming a Prism El

Hi When entering a workload in Sizer, there is an option to select the existing CPU.For example, let’s assume that we are planning to deploy 100 VMs, each with 4 vCores and 8 GB of memory.  If I select “Yes, but I don’t know the current processor” and then choose Default, the estimated CPU utilization is approximately 75% when configured with a 3-node cluster, each node having 2 CPUs with 32 cores.However, if I edit the workload and select “Yes, but I don’t know the current processor”, the estimated CPU utilization increases to around 110%.In other words, I am not sure which criteria I should use when performing sizing.Why does the estimated utilization differ so significantly even though the workload itself is the same?Is there any detailed guidance available for this? It may be that I have not been able to find it, so I would appreciate your assistance.

I just scheduled my Nutanix Certified Professional - Cloud Integration - Azure (NCP-CI-Azure) 6.10 certification exam for next Friday.  

I passed the NCP-MCI 6.10 exam yesterday. I genuinely enjoyed the experience. The official Nutanix training course, along with a Udemy course, did a great job preparing me for the exam.

Hello Since onw month, when change some VMs, of Data Protection to Ptotection Policie, show the next alerts: VSS is enabled, but Nutanix VSS provider or pre_freeze/post_thaw scripts are not installedVSS snapshot is not supported for the VM X because VSS software is not installed.I returned some VMs to Data Protection, and the alerts did not return.Why do it pass this behavior?

Hello I have some GKE clusters with persistent volume on Cluster Nutanix In this days, We are doing one POC with NKP in the same Cluster.My Question, Is possible attach GKE to Console of NKP? I understand that I can't make any changes to the nodes, but I want to know if I can view them perfomance.its possible?

Hi team, quick question: Is it supported to mix NICs on the same node? Specifically, can both the Mellanox 2-port CX5 SFP28 (25G) and the Intel 2-port E810 SFP28 (25G) (E810-XXVDA2) be used together on a single node?

How to dump Linux Extractor memory in Nke or NKP? Can I just install lime.ko manually on the Linux Nke OS or does Nutanix have its own way to get the dump file of the memory extractor?

Hello,!--tgqphd|[]-->My NCP-MCI exam voucher is expiring in a few days. Due to major personal and family reasons (newborn baby), I haven't been able to prepare for the test properly.!--tgqphd|[]-->I just emailed certification@nutanix.com!--tgqphd|[]--> to ask for a 2-month extension so I can study and pass it under good conditions.!--tgqphd|[]-->Has anyone here ever requested an extension from Nutanix University near the expiration date? Are they usually flexible and understanding with these requests?!--tgqphd|[]-->Thank you!

Hi,I’ve got a question about where a VM on AHV get’s it’s time at boot-up from.Background:  I was reviewing the event logs on a couple of windows servers, and looking at the bootup process.  Event times, start at UTC and then a bit through the boot-up it jumps an hour to GMT (Presumably when windows time starts, and syncs with the domain)  I’d prefer this not to happen, and would like the BIOS/Boot time to be GMT if possible. Does the VM “BIOS”boot time come from the CVM which I’ve found the process to change the timezone for, or the Host which the recommended configuration is to leave at UTC?Thanks in advance G

Buenos días,He estado revisando las opciones disponibles para la segregación del tráfico de Disaster Recovery en entornos Nutanix. Según la documentación oficial (Disaster Recovery Guide), es posible crear una interfaz de red adicional dedicada para este tipo de tráfico.No obstante, me surgen algunas dudas respecto a la implementación práctica:¿Cuál sería el procedimiento recomendado (how-to) para asegurar que el tráfico de DR se enruta correctamente a través de dicha interfaz? En escenarios de fallo o degradación de red, ¿Cómo se comportaría este tráfico dedicado? Concretamente, ¿Qué impacto tendría esta configuración en un entorno con Metro Availability, especialmente en términos de resiliencia y continuidad operativa?¿Alguien ha tenido experiencia implementando este enfoque y puede compartir mejores prácticas o consideraciones a tener en cuenta?Muchas gracias de antemano por vuestra ayuda.

Can you please share certification Nutanix NCP-MCI 6.10 Beta Exam Voucher